Änderungen
/* Datei: 30-sysinfo */
Hier eine kurze Beschreibung, wie man eine dynamische motd erstellt.
== Schritte ==
figlet installieren, damit der Servername "schön" angezeigt wird.
apt-get install figlet
update-motd.d Verzeichnis in /etc erstellen, falls er noch nicht vorhanden ist.
mkdir /etc/update-motd.d/
Danach müssen die 2 Dateien noch befüllt werden. Der Inhalt der Dateien steht am Ende des Beitrages.
nano /etc/update-motd.d/20-header
nano /etc/update-motd.d/30-sysinfo
Alle 3 Dateien ausführbar machen.
chmod +x /etc/update-motd.d/*
{{Warnung|Die beiden nachfolgenden Schritte sind bei Debian 6 nicht nötig, da die Verknüpfung meistens schon vorhanden ist. Zu Not mit "ls -la /etc/motd" prüfen.}}
Alte motd Datei zur Sicherheit umbenennen
mv /etc/motd /etc/motd.bak
Verknüpfung zu der dynamischen motd erstellen.
ln -s /var/run/motd /etc/motd
== Ergebnis ==
[[Datei:dynamic-motd.png]]
In dem Beispiel wird nicht der Servername angezeigt, sondern "...NevaKee.de...".
== Datei: 20-header ==
#!/bin/sh
#
# 00-header - create the header of the MOTD
# Copyright (c) 2013 Nick Charlton
# Copyright (c) 2009-2010 Canonical Ltd.
#
# Authors: Nick Charlton <hello@nickcharlton.net>
# Dustin Kirkland <kirkland@canonical.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
[ -r /etc/lsb-release ] && . /etc/lsb-release
if [ -z "$DISTRIB_DESCRIPTION" ] && [ -x /usr/bin/lsb_release ]; then
# Fall back to using the very slow lsb_release utility
DISTRIB_DESCRIPTION=$(lsb_release -s -d)
fi
figlet $(hostname)
#figlet ...NevaKee.de..
#printf "\n"
#printf "Welcome to %s (%s).\n" "$DISTRIB_DESCRIPTION" "$(uname -r)"
#printf "\n"
== Datei: 30-sysinfo ==
#!/bin/bash
#
# 10-sysinfo - generate the system information
# Copyright (c) 2013 Nick Charlton
#
# Authors: Nick Charlton <hello@nickcharlton.net>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
cpuallusage=`ps aux | awk {'sum+=$3;print sum'} | tail -n 1 | awk '{printf "%.0f\n", $1}'`
cpucores=`cat /proc/cpuinfo | grep "model name" | wc -l`
cpuusage=$((cpuallusage / cpucores))
# \033[0;34m+ \033[0;37mCPU usage \033[0;34m= \033[1;32m$cpuusage%
echo -e "\033[0;34m+++++++++++++++++: \033[0;37mSystem Data\033[0;34m :+++++++++++++++++++++++++++++
\033[0;34m+ \033[0;37mDate and Time \033[0;34m= \033[1;32m`date`
\033[0;34m+ \033[0;37mKernel \033[0;34m= \033[1;32m`uname -r`
\033[0;34m+ \033[0;37mUptime \033[0;34m= \033[1;32m`uptime | grep -ohe 'up .*' | sed 's/,//g' | awk '{ printf $2" "$3 }'`
\033[0;34m+ \033[0;37mLoad \033[0;34m= \033[1;32m`cat /proc/loadavg | awk '{print $1}'` `cat /proc/loadavg | awk '{print $2}'` `cat /proc/loadavg | awk '{print $3}'`
\033[0;34m+ \033[0;37mCPU model \033[0;34m= \033[1;32m$cpucores x `cat /proc/cpuinfo | grep -m 1 "model name" | awk -F ": " '{print $2}'`
\033[0;34m+ \033[0;37mMemory \033[0;34m= \033[1;32mUsed `free -m | head -n 2 | tail -n 1 | awk {'print $3'}` MB out of `free -m | head -n 2 | tail -n 1 | awk {'print $2'}` MB
\033[0;34m+ \033[0;37mHDD \033[0;34m= \033[1;32mUsed `df -h / | tail -n 1 | awk {'print $3'}` out of `df -h / | tail -n 1 | awk {'print $2'}`
\033[0;34m+ \033[0;37mProcesses \033[0;34m= \033[1;32m`ps aux | wc -l` of `ulimit -u` MAX
\033[0;34m+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\033[0;37m
"
[[Kategorie:SSH]]
== Schritte ==
figlet installieren, damit der Servername "schön" angezeigt wird.
apt-get install figlet
update-motd.d Verzeichnis in /etc erstellen, falls er noch nicht vorhanden ist.
mkdir /etc/update-motd.d/
Danach müssen die 2 Dateien noch befüllt werden. Der Inhalt der Dateien steht am Ende des Beitrages.
nano /etc/update-motd.d/20-header
nano /etc/update-motd.d/30-sysinfo
Alle 3 Dateien ausführbar machen.
chmod +x /etc/update-motd.d/*
{{Warnung|Die beiden nachfolgenden Schritte sind bei Debian 6 nicht nötig, da die Verknüpfung meistens schon vorhanden ist. Zu Not mit "ls -la /etc/motd" prüfen.}}
Alte motd Datei zur Sicherheit umbenennen
mv /etc/motd /etc/motd.bak
Verknüpfung zu der dynamischen motd erstellen.
ln -s /var/run/motd /etc/motd
== Ergebnis ==
[[Datei:dynamic-motd.png]]
In dem Beispiel wird nicht der Servername angezeigt, sondern "...NevaKee.de...".
== Datei: 20-header ==
#!/bin/sh
#
# 00-header - create the header of the MOTD
# Copyright (c) 2013 Nick Charlton
# Copyright (c) 2009-2010 Canonical Ltd.
#
# Authors: Nick Charlton <hello@nickcharlton.net>
# Dustin Kirkland <kirkland@canonical.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
[ -r /etc/lsb-release ] && . /etc/lsb-release
if [ -z "$DISTRIB_DESCRIPTION" ] && [ -x /usr/bin/lsb_release ]; then
# Fall back to using the very slow lsb_release utility
DISTRIB_DESCRIPTION=$(lsb_release -s -d)
fi
figlet $(hostname)
#figlet ...NevaKee.de..
#printf "\n"
#printf "Welcome to %s (%s).\n" "$DISTRIB_DESCRIPTION" "$(uname -r)"
#printf "\n"
== Datei: 30-sysinfo ==
#!/bin/bash
#
# 10-sysinfo - generate the system information
# Copyright (c) 2013 Nick Charlton
#
# Authors: Nick Charlton <hello@nickcharlton.net>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
cpuallusage=`ps aux | awk {'sum+=$3;print sum'} | tail -n 1 | awk '{printf "%.0f\n", $1}'`
cpucores=`cat /proc/cpuinfo | grep "model name" | wc -l`
cpuusage=$((cpuallusage / cpucores))
# \033[0;34m+ \033[0;37mCPU usage \033[0;34m= \033[1;32m$cpuusage%
echo -e "\033[0;34m+++++++++++++++++: \033[0;37mSystem Data\033[0;34m :+++++++++++++++++++++++++++++
\033[0;34m+ \033[0;37mDate and Time \033[0;34m= \033[1;32m`date`
\033[0;34m+ \033[0;37mKernel \033[0;34m= \033[1;32m`uname -r`
\033[0;34m+ \033[0;37mUptime \033[0;34m= \033[1;32m`uptime | grep -ohe 'up .*' | sed 's/,//g' | awk '{ printf $2" "$3 }'`
\033[0;34m+ \033[0;37mLoad \033[0;34m= \033[1;32m`cat /proc/loadavg | awk '{print $1}'` `cat /proc/loadavg | awk '{print $2}'` `cat /proc/loadavg | awk '{print $3}'`
\033[0;34m+ \033[0;37mCPU model \033[0;34m= \033[1;32m$cpucores x `cat /proc/cpuinfo | grep -m 1 "model name" | awk -F ": " '{print $2}'`
\033[0;34m+ \033[0;37mMemory \033[0;34m= \033[1;32mUsed `free -m | head -n 2 | tail -n 1 | awk {'print $3'}` MB out of `free -m | head -n 2 | tail -n 1 | awk {'print $2'}` MB
\033[0;34m+ \033[0;37mHDD \033[0;34m= \033[1;32mUsed `df -h / | tail -n 1 | awk {'print $3'}` out of `df -h / | tail -n 1 | awk {'print $2'}`
\033[0;34m+ \033[0;37mProcesses \033[0;34m= \033[1;32m`ps aux | wc -l` of `ulimit -u` MAX
\033[0;34m+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\033[0;37m
"
[[Kategorie:SSH]]
