Änderungen
Beschreibung von der UnixBench Homepage[http://code.google.com/p/byte-unixbench/]:
UnixBench is the original BYTE UNIX benchmark suite, updated and revised by many people over the years.
The purpose of UnixBench is to provide a basic indicator of the performance of a Unix-like system; hence, multiple tests are used to test various aspects of the
system's performance. These test results are then compared to the scores from a baseline system to produce an index value, which is generally easier to handle than
the raw scores. The entire set of index values is then combined to make an overall index for the system.
Some very simple graphics tests are included to measure the 2D and 3D graphics performance of the system.
Multi-CPU systems are handled. If your system has multiple CPUs, the default behaviour is to run the selected tests twice -- once with one copy of each test program
running at a time, and once with N copies, where N is the number of CPUs. This is designed to allow you to assess:
- the performance of your system when running a single task
- the performance of your system when running multiple tasks
- the gain from your system's implementation of parallel processing
Do be aware that this is a system benchmark, not a CPU, RAM or disk benchmark. The results will depend not only on your hardware, but on your operating system,
libraries, and even compiler.
== Vorbereitung ==
Folgende Pakete müssen installiert sein:
libx11-dev
libgl1-mesa-dev
libxext-dev
perl
perl-modules
make
gcc
Bei Debian:
apt-get install libx11-dev libgl1-mesa-dev libxext-dev perl perl-modules make gcc
== Unix Bench runterladen und starten ==
wget http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz
tar xfv UnixBench5.1.3.tgz
cd UnixBench
./Run
Nach ein paar Minuten bekommt man dann das Ergebnis angezeigt.
== Downloads ==
UnixBench5.1.3.tgz: [http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz]
unixbench-5.1.2.tar.gz: [http://byte-unixbench.googlecode.com/files/unixbench-5.1.2.tar.gz]
[[Kategorie:Software]]
UnixBench is the original BYTE UNIX benchmark suite, updated and revised by many people over the years.
The purpose of UnixBench is to provide a basic indicator of the performance of a Unix-like system; hence, multiple tests are used to test various aspects of the
system's performance. These test results are then compared to the scores from a baseline system to produce an index value, which is generally easier to handle than
the raw scores. The entire set of index values is then combined to make an overall index for the system.
Some very simple graphics tests are included to measure the 2D and 3D graphics performance of the system.
Multi-CPU systems are handled. If your system has multiple CPUs, the default behaviour is to run the selected tests twice -- once with one copy of each test program
running at a time, and once with N copies, where N is the number of CPUs. This is designed to allow you to assess:
- the performance of your system when running a single task
- the performance of your system when running multiple tasks
- the gain from your system's implementation of parallel processing
Do be aware that this is a system benchmark, not a CPU, RAM or disk benchmark. The results will depend not only on your hardware, but on your operating system,
libraries, and even compiler.
== Vorbereitung ==
Folgende Pakete müssen installiert sein:
libx11-dev
libgl1-mesa-dev
libxext-dev
perl
perl-modules
make
gcc
Bei Debian:
apt-get install libx11-dev libgl1-mesa-dev libxext-dev perl perl-modules make gcc
== Unix Bench runterladen und starten ==
wget http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz
tar xfv UnixBench5.1.3.tgz
cd UnixBench
./Run
Nach ein paar Minuten bekommt man dann das Ergebnis angezeigt.
== Downloads ==
UnixBench5.1.3.tgz: [http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz]
unixbench-5.1.2.tar.gz: [http://byte-unixbench.googlecode.com/files/unixbench-5.1.2.tar.gz]
[[Kategorie:Software]]
